EPEVER SOLAR CHARGE CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
EPEVER SOLAR CHARGE CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Photo voltaic Charge Controller is a remarkably productive photo voltaic controller designed for off-grid photo voltaic units. Determined by multiphase synchronous rectification engineering, it makes certain optimized energy conversion and process stability for a wide array of photovoltaic (PV) apps.
Vital Characteristics with the EPEVER Tracer AN Series Controller
The Tracer AN series utilizes EPEVER Solar Demand Controller engineering for outstanding solar Strength harvesting. Vital features contain:
Multiphase Synchronous Rectification (MSR) for improved Vitality conversion.
Innovative MPPT Algorithm with >ninety nine% effectiveness.
Dual-Stage Charging for Improved battery existence.
LCD Show with actual-time info monitoring.
Multiple Load Manage Modes including handbook and timer.
Extensive Digital Protections against overcharging, above-discharging, quick circuits, and reverse polarity.
Action-by-Move Guideline to Setting Up the EPEVER Tracer AN Series Controller
1. Unboxing and Preparing the Controller
Assure all factors are included: Tracer AN unit, temperature sensor, conversation cables, and person manual.
Validate the model selection and voltage ratings match your photo voltaic panel and battery specs.
two. Mounting the Demand Controller
Pick out a perfectly-ventilated, dry place near to the battery lender.
Protected the Tracer AN controller using the delivered mounting brackets.
Sustain suitable clearance for heat dissipation.
three. Wiring the Photo voltaic Charge Controller
Caution: Usually adhere to proper protection protocols and make sure the method is driven off in advance of connecting elements.
Stage one: Link the battery terminals into the charge controller (positive to beneficial, negative to destructive).
Stage two: Hook up the solar panel array to your PV input terminals.
Stage three: Hook up the load terminals if employing a direct load relationship.
Move four: Double-Verify all connections for polarity and tightness.
four. Configuring the Controller Configurations
Electric power about the controller by connecting the battery first.
Make use of the LCD Screen to navigate the configurations menu.
Configure:
Battery Style: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Control Modes: Manual, timer, gentle Handle.
five. Checking and Data Logging
The Tracer AN Sequence supports true-time checking utilizing the MT50 distant meter.
Information is usually logged via the RS485 communication port employing software including Photo voltaic Station PC.
Distant monitoring can be done With all the EPEVER WiFi module.
six. Troubleshooting Prevalent Troubles
Concern 1: No Electricity Output
Verify battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Problem 2: Around-Voltage Safety
Verify the photo voltaic array’s voltage rating.
Change method parameters if needed.
Difficulty 3: No Battery Charging
Inspect PV wiring for continuity.
Validate MPPT configurations in the menu.
Benefits of the Tracer AN Sequence with MSR Engineering
The multiphase synchronous rectification technological know-how assures:
Better Performance: Reduced Vitality losses during conversion.
Enhanced Reliability: Stable performance below variable hundreds.
For a longer period Battery Click Here Lifestyle: Steady and precise charging profiles.
Summary
The EPEVER Photo voltaic Demand Controller with multiphase synchronous rectification engineering is an Extraordinary option for optimizing solar power era and extending battery daily life. By next the above set up guideline, customers can assure most efficiency and program longevity.